Complementing a traditional electric scooter with a display can help ensure that the scooter is running properly. If an electric scooter’s display isn’t illuminated, we need to determine the cause.
My electric scooter’s display recently stopped working, so I attempted a few solutions to fix the problem but was unsuccessful. I took it to the scooter store, but they said I would need to buy a new display for over $100.
I wasn’t about to spend that much money on a new display when the scooter was working fine otherwise, so I did some research and found a way to fix it myself. If you want to achieve the same results I did, simply follow the steps outlined in this blog post.
6 Reasons Behind Electric Scooter’s Display Failure
The following are the issues that display of electric scooters face:
1. The battery is out of power
The battery is what supplies the electric energy for the scooter, so if the display doesn’t work, try checking the battery. If the battery does not have enough power or is completely dead, the display will not turn on when the bike starts.
2. Having connections that are not close or tight
The display on an electric scooter not working is usually due to a loose connection wire which then causes the power to be lost. More often than not, the display will have numerous wires running to and from the circuit. If any of these become disconnected or loose, the screen will go blank.
3. Pins that are damaged
A broken tooth on the connector between the display and the battery of an electric scooter will cause the display to fail. In addition to that, if the leg in the battery system is broken, the current cannot reach the computer. Consequently, the display might stop working.
4. The controller is not working
The controller is a vital piece to your electric scooter. Because of it, you have full control over the bike – turn it on or off with a click, speed up or slow down. If the controller isn’t responding as it should, the display will either not flash or not work altogether.
5. Switch failure
The throttle has a power button installed electric scooter. The display also has on/off buttons, as well as a button to set or reset the device. The display will not turn on if any one of these buttons is damaged.
6. The screen is flickering/not working
In extremely rare circumstances, the issue is located within the electric scooter’s display. It could be a problem with the IC or screen which can only be fixed by replacing the display or calling the customer service of the manufacturer.
How can you fix the display on my electric scooter?
1. Make sure the power level is correct
To check the level of your electric scooter battery if it doesn’t have a built-in indicator, use a voltmeter. If your vehicle is at 20% battery or below, plug it in and see if that stops the problem.
2. Restart it
If your E-scooters screen isn’t responding, first check if the battery is low. If it’s not, then you can try restarting the scooter to see if that fixes the issue. If the electric scooter’s screen functions well after we restart it, then we can go back to riding as usual. If the screen does not work after restarting, we need to find out why by trying other actions.
3. Look for lost or damaged wires
We mentioned this before, but if an electric scooter’s display isn’t working, it could be because of a wiring issue. We should check the wiring to ensure that everything is still secure and where it belongs. The display will not work again until any damaged wires are repaired or replaced.
A wire may have come loose from its connection. We should check every connection to make sure it is secure. If a wire is indeed loose, we can try to reconnect it. If the wire is damaged, replace it.
4. Update the firmware
In some cases, If the display isn’t working, you may need to update the firmware. You can usually finish this process quickly by using the mobile app that came with your electric scooter. After the firmware update is complete, the display should turn back on.
How does the display on the electric scooter work?
An electric scooter’s display is critical for both safety and style. The display is a critical aspect for any rider because it provides them with real-time data such as speed and battery life. A lot of displays come with a built-in odometer to help the rider keep track of how far they’ve gone.
The two most common types of displays for electric scooters are LCD and LED. LCD displays are more prevalent and use liquid crystals to display information. Although LED displays are less common, they use light-emitting diodes to show information. While both types of displays have their own sets of advantages and disadvantages, LCD displays tend to be more budget-friendly.
Most of these vehicles have a display on the handlebars. Some models have a display that is integrated into the stem, while others have a separate display that mounts on the handlebars. The size and resolution of displays can differ a lot from one model to another.
Conclusion
The display on an electric scooter is important for both safety and style. A lot of displays come with a built-in odometer to help the rider keep track of how far they’ve gone. You never know when e-scooter problems will pop up. Often, you can solve most of these problems without the help of a professional.
We hope you enjoyed this article. If you have any questions or comments, please feel free to reach out to us. We would be more than happy to help you!
Happy Riding!
FAQS
Does all the Electric Scooter’s display are waterproof?
The answer to this question in maximum cases is usually no. Many e-scooter models that are advertised as waterproof still discouraged riders from using them in the rain.
Can overcharging effects E-scooter display?
Yes, overcharging can damage or shorten the life of your E-scooter display. Even though most electronic displays are designed to turn off once they’re completely charged, it’s wise to unplug them from the power source as soon as they reach full charge.
How long do electric scooter displays last?
Most people expect their e-scooters to have a display life of around 3 to 5 years. However, this largely depends on the usage, conditions, and quality of the display. Lower-quality displays typically don’t even last for two full years, whereas higher-quality models can last up to 3 years.
My name is Sarah and I am a Content writer at eRidesAdvice. I have been writing about electric scooters for over seven years, and I am passionate about helping people find the perfect product for their needs. I am also an experienced rider, and I am always on the lookout for the latest and greatest electric scooters. I have got a degree in Automotive Engineering Technology from Ferris State University. Meet our team