One thing you don’t want to happen is for your scooter to stop working in the middle of nowhere. That’s why it’s important to know where the fuse is located on your electric scooter.
The fuse is a small component that is responsible for protecting the rest of the bike from damage caused by an overload of electricity. Many people have trouble finding the fuse on their scooters, and some even have trouble changing it when it blows.
In this blog post, we will show you exactly where the fuse is located on an electric scooter. We will also give you some tips on how to change it if it ever blows.
Where is the Fuse Located on an Electric Scooter?
When it comes to electric scooters, one of the most important things to know is where the fuse is located. This is because the fuse is what protects the scooter from overloading and becoming damaged.
Near battery packs or on the outside of scooters, fuses are usually located in wiring harnesses near the footplate.
How to locate the fuse in your Electric scooter?
If you’re like most people, you probably don’t think about your electric scooter’s fuse until it blows. Then, you’re left wondering where to find it so you can replace it.
Most electric scooters have two fuses: one for charging and one for the load. The fuse for charging is usually located in front of the battery, close to the motor. The load fuse is typically located on the side of the battery.
To replace a blown fuse, you’ll need to unscrew the footplate and release the gasket. Once you do that, the battery will be visible and the fuse will be located in front of it.
What does the fuse do in an electric scooter?
When you ride an electric scooter, you rely on a few key components to make the experience as smooth and enjoyable as possible. One of those components is the fuse, which is there to protect the scooter’s battery and electrical system from damage.
Simply put, the fuse acts as a safety device that prevents too much current from flowing through the electrical system. If there is an electrical short or overload, the fuse will “blow” and stop the flow of electricity. This protects the battery, wires, and other components from overheating and being damaged.
Without a fuse, an electrical short could cause a fire or other serious damage. So, if you’re riding an electric scooter, be sure to check the fuse regularly to make sure it’s in good working condition.
On what principle does the electric scooter fuse work?
The fuse in an electric scooter works on the principle of the heating effect of current. When the current flowing through the fuse is too high, it generates heat. The heat generated by the resistance of the fuse wire melts the solder that holds the fuse elements together. This causes the circuit to break and the flow of current to stop.
The size of the fuse is important because it must be able to carry the full current of the circuit without melting. If the fuse is too small, it will melt and the circuit will be interrupted. If the fuse is too large, it will not melt and the circuit will continue to flow, potentially causing damage to the equipment. For more details, you can check it out here.
How does the fuse work in an electric scooter?
An electric scooter usually has two fuses: one is located near the battery, and the other is located near the motor. The battery fuse is there to protect the battery from overcharging, and the motor fuse is there to protect the motor from overload.
When the scooter is turned on, the battery fuse will allow current to flow from the battery to the motor. The motor will then use that current to spin the wheels. When the battery is overcharged, the battery fuse will blow, cutting off the current flow and protecting the battery.
The motor fuse works similarly. If the motor is overloaded, the motor fuse will blow and cut off the flow of current, protecting the motor from damage.
Both fuses are important in keeping your electric scooter running smoothly and safely. If either fuse blows, it’s important to replace it as soon as possible to avoid any damage to your scooter.
You can view this Youtube video for a better understanding and visualization.
Here Are 6 Reasons Why My Electric Scooter Fuse Might Blow:
There are a few different reasons why a fuse might blow:
Overheating:
Due to its design, the electric scooter cannot handle the high temperatures that can result from reckless use, which can cause the fuse to blow. When the scooter overheats, the fuse will blow to protect the scooter from damage.
Overloading:
If the electric scooter is overloaded, the fuse will also blow. This is because the scooter is not designed to carry heavy weights. When the scooter is overloaded, the fuse will blow to prevent the scooter from being damaged.
Wrong size of the fuse:
You may also have a problem with the fuse not being the correct size. Smaller fuses are more likely to blow easily. An overheated scooter can also be caused by a fuse that is too big.
Defective Electrical Component:
When an electrical component is defective, it can cause a short circuit. This can cause the fuse to blow, as the electrical current is too high for the fuse to handle.
Short Circuit:
A short circuit on an electric scooter may also cause a fuse to blow. If the wires are damaged or not properly insulated, a short circuit could occur. When a short circuit happens, it can cause an electrical current to flow through the wires and blow the fuse.
Battery Damage:
An electric scooter’s fuse may also blow due to battery damage. When the battery is damaged, it can’t hold as much charge as it used to. This can cause the fuse to blow.
So, there you have it. These are the most common reasons for an electric scooter fuse to blow.
How to Repair a Blown Electric Scooter Fuse?
You need to know how to repair a blown electric scooter fuse. While this may seem like a daunting task, it is quite simple if you know what to look for. Here are the steps you need to take to repair a blown electric scooter fuse:
1: Inspect By Sight, Touch, And Smell: First, you need to inspect the fuse visually, by touch and smell. If the fuse is charred or smells like burning plastic, it must be replaced. Also, if the fuse has melted at all, it needs to be replaced immediately.
2: Check the condition of the fuse: You need to examine the fuse closely. Ensure that there are no burns, cuts, or damages. Keep an eye out for any loose wires or connections. Fuse replacement is necessary if you notice or smell anything unusual.
3: Check the speed controller: The next thing you need to do is inspect the speed controller’s wires and connectors. Make sure there are no signs of damage or burns. It will be necessary to replace the controller if it is damaged.
4: Check the motor: Last but not least, you should inspect the motor of your electric scooter. Plastic insulation can melt off a motor’s windings if the motor overheats, causing a short circuit and damaging the controller. Overheated motor coils should be replaced promptly to avoid damaging the speed controller as well.
Once you have checked all of these things, you should be able to determine what is causing the fuse to blow. If you cannot figure it out, you may need to take it to a professional.
Fuse location of different bikes:
The fuse location of different electric scooters can vary. Generally, the fuse will be located near the battery, speed controller, or motor of your electric scooter. It is usually housed in a small box with other electrical components and marked with an icon that looks like a fuse. In some cases, it may be necessary to remove the cover before you can access the fuse box
EcoReco M5 Air LE Electric Scooter:
A fuse is inside the gasket alongside the battery on the EcoReco M5 electric scooter. Both the charge and load fuses are wrapped under the red tape with values of 10 and 25 amp. If you need to replace the fuse, simply unscrew the old one and screw in the new one. Be sure to match the amperage value on the new fuse with the old one.
Xiaomi M365 Electric scooter:
The Xiaomi M365 electric scooter is a popular choice for those looking for an affordable and practical means of transportation. However, one common issue that owners face is figuring out where the fuse is located.
The fuse on the Xiaomi M365 electric scooter is located on the printed circuit board (PCB) at the bottom middle left alongside the capacitors.
Once you’ve located the fuse, simply replace it with a new one and your scooter should be up and running again.
Gotrax Scooter:
If you own a Gotrax scooter, you might be wondering where the electric scooter fuse is located. The fuse is located right under the floorboard, on the upper side of the battery. There is also a secondary fuse in case the primary fuse blows.
What type of fuse is used on an electric scooter?
When it comes to electric scooters, there are a few different types of fuses that can be used.
1. GMA Fuse:
The most common type is the GMA fuse. This type of fuse is available in sizes from 1 amp to 40 amp and has a dimension of 5*20 mm. It is also available in 125 and 250 voltages.
2. AGC Fuses:
The AGC fuse is another type of fuse used on electric scooters. This power supply comes in amp ratings between 5 and 40 and has a dimension of 6*32 mm. There are also two voltages available: 125 volts and 250 volts.
3. AGU Fuses:
ATO fuses are available in amperes from 1 to 50, have a dimension of 5 x 20 x 20 mm, and come with 32 Volts.
4. ATO Fuses:
Electric scooters use the ATO fuse, which is available in amp ratings ranging from 1 to 50. It has a dimension of 5*20*20 mm and is also available in a 32-volt version.
5. MAXI Fuses:
The fifth and final type of fuse is the MAXI fuse. A fuse of this type is available in sizes ranging from 20 amp to 120 amp, with dimensions of 9x29x35mm. The voltages are also available at 32 V.
You can check and buy these fuses from here.
How much do fuses cost in electric scooters?
All of a sudden, you’re frantically searching for a replacement fuse for your electric scooter. But how much do fuses cost?
It turns out that the cost of a fuse can vary quite a bit, depending on the type of fuse and where you purchase it.
The cost of an automotive fuse, for example, would be $0.50, while the cost of an ultra-rapid industrial fuse would be upwards of $50. It is even possible to buy specialty fuses that cost more than $200, such as medium voltage fuses.
Of course, if you’re handy and have the time, you could always try to replace the fuse yourself. However, we would only recommend this if you are confident in your abilities, as working with electrical components can be dangerous.
If you do decide to replace the fuse yourself, you’ll need to purchase the appropriate fuse for your scooter. Once you have the fuse, simply follow the instructions in your scooter’s manual to replace the old fuse with the new one.
Conclusion:
Electric scooter fuses are an important part of electric scooter maintenance and repair. Knowing where the fuse is located, as well as how much they cost, can help you troubleshoot any issues that arise with your electric scooter. Also, if you’re comfortable working with electrical components, it may be possible to replace the fuse yourself.
FAQs:
Why is the fuse located close to the battery?
The fuse is located close to the battery because it is the best place to protect the electrical system from shorts and overloads. The fuse is a sacrificial component that will burn out before the more expensive and difficult-to-replace components in the electrical system are damaged.
Why would my e-scooter fuse blow?
If your e-scooter fuse blows, it may be due to some reasons. The most common reason is that the battery is not properly charged. If the battery is not properly charged, it can cause the fuse to blow. Other reasons include short circuits, overload circuits, or loose connections.
Why does my e-scooter need a fuse?
A fuse is an electrical component that is used to protect other electrical components from damage due to overcurrent. An e-scooter needs a fuse because it has many electrical components that could be damaged if there is an overcurrent.
My name is Sarah and I am a Content writer at eRidesAdvice. I have been writing about electric scooters for over seven years, and I am passionate about helping people find the perfect product for their needs. I am also an experienced rider, and I am always on the lookout for the latest and greatest electric scooters. I have got a degree in Automotive Engineering Technology from Ferris State University. Meet our team