You’re riding your electric scooter along the sidewalk, the wind in your hair and the sun on your face. Your scooter stops working suddenly and you have no idea why. You try to accelerate, but the accelerator has no effect. The only thing you can think to do is kick the scooter and get home on foot.
If your electric scooter suddenly turned off while you were riding, why did it do that? It could be a dead battery, a disconnected cable, or a glitch in the program. It’s annoying whenever it occurs for any reason.
In case your electric scooter suddenly turns off while you’re riding it, here are some things to check to see what the problem could be.
Why Electric Scooter Shuts Off While Riding? (Causes + Solutions)
Problem 1: Battery Drainage Risk
Inexplicably, electric scooters frequently experience battery failure. This could be the result of a malfunctioning battery, improper charging, exposure to extreme cold, or gradual loss of power.
Don’t confuse a low battery with a dead one. A dead battery will suddenly stop working, but a low one still has some energy left. The latter problem can be fixed by charging the battery.
Only by charging a dead battery can it be revived. Keep in mind that it will take longer to fully charge the battery. To avoid this from happening, make sure your battery is always fully charged. If you ride an electric scooter, you should always charge the battery before going to sleep.
If your battery won’t charge, try switching it to a different outlet. A voltmeter can help you check if your battery is charging properly. If your battery still won’t charge, you should get a new one and get rid of the old one.
Problem 2: Exceptional Engine Heating
Extreme engine heat can be caused by many environmental and operational factors, including but not limited to high temperatures and overloading. If you hear the motor warming up on your electric scooter, you need to turn it off and fix it properly the first time. The vehicle’s battery and the engine could be damaged if this isn’t done.
Electric scooters need to be turned off and allowed to cool down before being checked. Inspect the e-wiring, scooter’s fuse, and electrical controller as soon as you can handle it safely.
Despite the blown fuse and frayed wiring, your e-scooter will still function. However, you should immediately contact your professional to address this problem. While the problem is being fixed, you should not use your electric scooter.
Problem 3: Blown Fuse
Overload causes frequent tripping of the circuit breaker or blowing of the fuse. If the fuse in your electric scooter blows, you won’t be able to use it. Burning through fuses too quickly can damage your motor or speed controller.
If your electric scooter isn’t responding, check to determine if the primary ignition fuses have been turned on. If you need to use it, go ahead and turn it on before restarting the vehicle’s engine. If the fuse blows, you’ll need to replace it with a new one before trying to start the vehicle. A professional should replace your blown fuse for your protection.
Problem 4: Battery Wearing Down or Dying
If you’re riding an electric scooter and noticing that it’s slowing down or stopping while you’re out and about, especially on flat terrain, the battery may be dying and needs to be replaced. It’s a relief to know that this problem can be fixed.
Unfortunately, the only way to resolve this is to replace them. Your battery has seen better days; get a new one to avoid any potential issues. A battery’s lifespan can be significantly increased by avoiding overcharging and undercharging, but if you can’t yet replace it, this is a good alternative.
Problem 5: Activation of the Kill Switch
Some electric scooters have a “kill Switch” button to prevent further use of the battery after use. A common piece of advice is to activate the kill switch whenever the e-scooter is not in use or is being charged.
Before worrying about a dead or dying battery, make sure the kill switch isn’t engaged. If it is on, just turn it off and try starting the scooter again. To make sure the vehicle is running, start by checking the battery. If you are unable to determine the cause of your scooter’s inability to turn over, you should take it to a professional as soon as possible.
Problem 6: Failure of the Speed Regulator
The speed controller on electric scooters is also a common issue. The speed regulator limits your speed to an acceptable range. It’s a vital part of your e-scooter, but it might get broken if you don’t maintain it properly.
If you want to fix a broken speed controller, you have to take it apart first. Next, make sure all cables are securely fastened and replace any that are damaged. Once you’re done, put it back together. Careful attention to detail during reassembly is required to prevent mistakes and maintain personal safety. Determine if the acceleration on your electric scooter is functioning correctly by testing it.
Problem 7: Sluggish to Nonexistent Pickup in Pace
This is similar to the earlier difficulty. Your rate of progress is the determining factor. Problems may exist if your e-scooter is slow to get going or accelerate when riding on level ground.
To fix this, check the speed controller or fuse. A blown fuse or a malfunctioning speed controller are also possible causes of speed-related issues. If you suspect an electrical issue, you can also check the wiring. If the controller, fuse, and wiring appear to be in good shape, you should still have a professional take a look, for the best outcomes.
Problem 8: Power Supply/Charger Failure
A charger may malfunction if it is overcharged or if it is plugged into a socket with a voltage that is higher or lower than what it was designed for. A broken power supply can be a major hassle because you need it to charge your e-scooter.
As a first step, see if the charger works when plugged into other outlets. Lighting up often signifies the existence of electricity. If the charger isn’t functioning properly, you might need to replace it. A voltmeter will verify the charger’s output. Furthermore, before buying a new e-scooter charger, make sure it is compatible with the electrical voltage in your home to avoid damaging your charger or the scooter.
Problem 9: Tripping of Circuit Breaker
Has an electric scooter ever suddenly switched off on you while you were using it? If that’s the case, perhaps a breaker has been tripped.
Examine the scooter for frayed wires or blown fuses in the electrical system. Please make sure the cables are fastened securely. If the circuit is overloaded or the inclination is too great, the breaker may trip. When your electric scooter comes to a stop, you can either wait a few seconds before restarting it, or you can simply pause it for a bit. A professional inspection is to prevent this from happening again.
Conclusion
However, you may be able to fix common and minor issues with your electric scooter on your own. Always take caution if you try to fix your electric scooter yourself. If troubleshooting and fixing your electric scooter on your own proves futile, it’s best to call in a professional for assistance. Prioritize your safety above everything else, and stay away from parts you are unfamiliar with if at all feasible.
In this post, we’ve discussed some of the potential causes of your electric scooter turning off unexpectedly and offered some suggestions for how to address the issue. We further suggest taking your scooter to a professional repair shop for further diagnosis if the problems persist. For now, we wish you a joyous and risk-free experience on your scooter.
My name is Sarah and I am a Content writer at eRidesAdvice. I have been writing about electric scooters for over seven years, and I am passionate about helping people find the perfect product for their needs. I am also an experienced rider, and I am always on the lookout for the latest and greatest electric scooters. I have got a degree in Automotive Engineering Technology from Ferris State University. Meet our team